China Wholesale Metal Tie Gun Suppliers - PG/M/MG type nylon cable gland – Jiaxun
China Wholesale Metal Tie Gun Suppliers - PG/M/MG type nylon cable gland – Jiaxun Detail:
Product parameter
|
Item No. |
Thread |
(mm) |
H (mm) |
GL (mm) |
(mm) |
|
JX-7 |
PG 7 |
3-6.5 |
21 |
8 |
15 |
|
JX-7 |
PG 7 |
2-5 |
21 |
8 |
15 |
|
JX-9 |
PG 9 |
4-8 |
21 |
8 |
19 |
|
JX-9 |
PG 9 |
2-6 |
22 |
8 |
19 |
|
JX-11 |
PG 11 |
5-10 |
25 |
8 |
22 |
|
JX-11 |
PG 11 |
3-7 |
25 |
8 |
22 |
|
JX-13.5 |
PG 13,5 |
6-12 |
27 |
9 |
24 |
|
JX-13.5 |
PG 13,5 |
5-9 |
27 |
9 |
24 |
|
JX-16 |
PG 16 |
10-14 |
28 |
10 |
27 |
|
JX-16 |
PG 16 |
7-12 |
28 |
10 |
27 |
|
JX-21 |
PG 21 |
13-18 |
31 |
11 |
33 |
|
JX-21 |
PG 21 |
9-16 |
31 |
11 |
33 |
|
JX-29 |
PG 29 |
18-25 |
39 |
11 |
42 |
|
JX-29 |
PG 29 |
13-20 |
39 |
11 |
42 |
|
JX-36 |
PG 36 |
22-32 |
48 |
13 |
53 |
|
JX-36 |
PG 36 |
20-26 |
48 |
13 |
53 |
|
JX-42 |
PG 42 |
32-38 |
49 |
13 |
60 |
|
JX-42 |
PG 42 |
25-31 |
49 |
13 |
60 |
|
JX-48 |
PG 48 |
37-44 |
49 |
14 |
65 |
|
JX-48 |
PG 48 |
29-35 |
49 |
14 |
65 |
The terminal connector acts as a bridge between the electronic parts. Its main function is conduction and minimum contact impedance. Therefore, there are some specifications for the main parameters of the terminal connector product. 1. The insertion force and pull-out force of a terminal connector generally refer to the coordination of a single terminal, and the connector requires a minimum insertion force and a maximum pull-out force. 2. The combination and pull-out force of the terminal connector refers to the overall matching insertion force and pull-out force of the connector. 3. The retention force of the terminal connector refers to the axial force that the terminal can withstand after mating with the HSG. The retention force is sufficient to prevent the terminal from exiting the plastic body (pin removal) or poor contact. 4. The positive force of the terminal connector is the normal force of the terminal perpendicular to the contact surface of the terminal after the connector is inserted. The positive force guarantees the reliability of the contact between the terminal male and the female, which is an important parameter considered for terminal design and material selection. . The holding force of a terminal connector refers to the vertical and horizontal pulling force that the terminal of the connector can withstand. This test is usually done according to customer requirements. Precautions for the use of terminal connectors:
1. The purpose of producing “terminal connectors” is to connect electricity and electrical signals, so please do not use them for components or parts of components that are premised on applying mechanical force to the combination of “terminal connectors”.
2. “Terminal connectors” are divided into two types for wiring in equipment and wiring between equipment. “Terminal connectors” for wiring in equipment can only be used for the “inside of the main body of the equipment” specified by the Electrical Appliances Safety Law. Wiring”, please perform proper treatment on the equipment side to prevent ordinary people from touching it.
3. Please use the product within the range of the rated value and performance specified in the product specification when using it. In addition, the rated value and performance specification are specified as parts. In actual use, please confirm that it complies with the regulations and design related to the equipment used. Standards, etc.
4. Do not place the “terminal connector” and process products or processed products in an environment with corrosive substances, corrosive gases, high temperature and humidity, and direct sunlight, otherwise the terminals will be corroded or the insulation performance of the plastic case will be aging, etc. This may result in malfunction of the equipment, etc.
5. Do not apply external force to the terminal connector and the work-in-process or processed products (wiring harness, etc.), otherwise it will cause deformation and damage, resulting in poor connector performance.
Product detail pictures:
Related Product Guide:
The corporation upholds the philosophy of "Be No.1 in high quality, be rooted on credit rating and trustworthiness for growth", will continue to serve outdated and new consumers from home and overseas whole-heatedly for China Wholesale Metal Tie Gun Suppliers - PG/M/MG type nylon cable gland – Jiaxun , The product will supply to all over the world, such as: Bolivia, Auckland, Suriname, At Present, our products have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
By Alberta from Slovakia - 2017.09.16 13:44
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Roland Jacka from Bolivia - 2017.10.25 15:53
Related products
-
China Wholesale Tag Zip Ties Suppliers - Stain...
Product parameter Part No. Approx. Length mm(inch) Approx. Width mm(inch) Max. Bundle Dia. mm(inch) Min. loop Tensile Strength N(lbs) JXLJ-6.5×150 150(5.9) 6.5(0.26) 37(1.46) 1000(270) JXLJ-6.5×200 200(7.87) 50(1.97) JXLJ-6.5×250 250(9.84) 63(2.48) JXLJ-6.5×300 300(11.8) 76(2.99) JXLJ-6.5×350 350(13.78) 89(3.5) JXLJ-6.5×400 400(15.75) 102(4.02) JXLJ-6.5×450...
-
China Wholesale Hook Cable Clips Suppliers - N...
Product parameter Item No. L W mm Max.bundle Dia. mm Tensile Strength Packing lbs kgs JX-100 100 3.6 22 40 18 100PCS JX-150 150 4.7 35 50 22 JX-200 200 4.7 50 50 22 JX-250 250 4.8 65 50 22 JX-300 300 4.7 65 50 22
-
China Wholesale Zip Tie Connectors Exporters -...
Product parameter Item No. Dimension color U.S. standard screw bolt diameter B L F H DΦ D2(mm) mm mm mm mm mm SV 1.25-3.2 # 4 3.2 5.7 21.2 6.5 10.0 4.3 red SV 1.25-3.7S # 6 3.7 5.7 21.2 6.5 SV 1.25-3.7L # 6 3.7 6.4 21.2 6.5 SV 1.25-4S # 8 4.3 6.4 21.2 6.5 SV 1.25-4M # 8 4.3 7.2 21.2 6.5 SV 1.25-4L # 8 ...
-
China Wholesale Cable Tie Knot Suppliers - Sta...
Product parameter Part No. Approx. Length mm(inch) Approx. Width mm(inch) Max. Bundle Dia. mm(inch) Min. loop Tensile Strength N(lbs) JXL-10×150 150(5.9) 10(0.39) 37(1.46) 1200 JXL-10×200 200(7.87) 50(1.97) JXL-10×250 250(9.84) 63(2.48) JXL-10×300 300(11.8) 76(2.99) JXL-10×350 350(13.78) 89(3.5) JXL-10×400 400(15.75) 102(4.02) JXL-10×450 450(17.72) 115(4.53) JXL-10×500 500(19.69) 128(5.04) JXL-10×550 550(21....
-
China Wholesale Self Adhesive Cable Tie Mounts ...
Why choose this product? Cable ties should be an essential part of every tool kit. With the range there are a variety of lengths and widths to suit all your requirements. Features and Benefits? • High quality • Suitable for a multitude of uses • Easy to thread • Black and natural colours available in a range of sizes • Self-extinguishing to rating UL94V-2 • UL approved nylon 6.6 Product parameter
-
China Wholesale White Plastic Cable Ties Suppli...
There are many different types of cable ties on the market today. Some deal with extreme temperatures while others provide the ability to hold heavy loads securely. Here is our Products, we carry a large variety of cable ties. Below are descriptions of some of the cable ties we carry. When available, we have given their environmental operational temperatures and tensile strength so you will be able to pick the perfect cable tie for you need for your job. Product parameter Item No. ...
