• download

DT(G) Copper Connecting Terminal

Short Description:


Product Detail

Product Tags

Product parameter

Type

Ø

D

d

L

L1

DT(G)-10

6.5

8

5

51

28

DT(G)-16

6.5

9

6

57

32

DT(G)-25

8.5

10

7

61

32

DT(G)-35

8.5

11

8.5

66

36

DT(G)-50

8.5

13

10

72

38

DT(G)-70

10.5

15

12

80

43

DT(G)-95

10.5

18

14

85

44

DT(G)-120

12.5

20

15

97

51

DT(G)-150

12.5

22

17

102

53

DT(G)-185

14.5

25

19

113

54

DT(G)-240

16.5

27

21

118

56

DT(G)-300

16.5

30

24

128

62

DT(G)-400

21.0

34

26

150

65

DT(G)-500

21.0

38

30

170

70

DT(G)-630

21.0

45

35

200

80

As a kind of connector, the terminal is an important component in the electrical industry. It plays an irreplaceable and non-negligible role. Because engineers and technicians firstly check the interface during maintenance. That is to say, the terminal starts with the terminal. The design is particularly important.

It is convenient and simple to use. You only need to press it with a vise to complete the connection. You can directly insert the wire into the wiring hole of the terminal, and the connection can be completed by pressing or spinning in one simple action. If it is equipped with special wiring pliers for connection, the effect is better, faster, and the connection rate is 100%, which plays a significant role in telephone and network wiring projects. 1. Screw connection method of terminal block

Screw connection is a connection method using screw terminal blocks. Pay attention to the maximum and minimum cross-sections of the wires allowed to be connected, as well as the maximum tightening torque allowed by screws of different specifications. 2. The welding connection method of the terminal block

The most common type of soldering is soldering. The most important thing for soldering connection is the continuity of the metal between the solder and the surface to be soldered. Therefore, solderability is important for cold-pressed terminals. The most common coatings on the solder side of the wire ring terminal are tin alloy, silver and gold. The reed type contact has the welding piece type, the punching welding piece type and the notched welding piece type for the common welding end: the pinhole contact has the drilling arc notch type for the common welding end. 3. Crimping connection method of terminal block

Crimping is a technique for compressing and displacing metal within specified limits and connecting wires to contact pairs. A good crimp connection can produce metal mutual fusion flow, so that the wire and the contact pair material symmetrically deform. This connection is similar to a cold-welded connection, which can obtain better mechanical strength and electrical continuity, and it can withstand more severe environmental conditions. 4. Winding method of terminal block

Winding is to wind the wire directly on the angular contact winding post. During winding, the wire is wound under controlled tension, and pressed into and fixed at the corners of the contact piece winding post to form an air-tight contact.

55

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • SC JGK type copper cable lug

      SC JGK type copper cable lug

      Product parameter Type Ø D d L SC(JGK)-1.5 Ø4.2,Ø5.2 3.5 1.8 18 SC(JGK)-2.5 Ø4.2,Ø5.2,Ø6.2 4 2.5 19 SC(JGK)-4 Ø5.2,Ø6.2 4.8 3.1 21 SC(JGK)-6 Ø5.2,Ø6.2,Ø8.2 5.5 3.8 24 SC(JGK)-10 Ø6.2,Ø8.2 6.8 4.8 25.5 SC(JGK)-16 Ø6.2,Ø8.2,Ø10.5 7.5 5.5 30.5 SC(JGK)-25 Ø6.2,Ø8.2,Ø10.5 9 7 34 SC(JGK)-35 Ø6.2,Ø8.2,Ø10.5,Ø12.5 10.5 8.2 38 SC(JGK)-50 Ø8.2,Ø10.5,Ø12.5 12.5 9.8 ...

    • DT Copper Connecting Terminal

      DT Copper Connecting Terminal

      Product parameter Type Ø D d L L1 B DT-10 8.5 9 5.8 67 34 16 DT-16 8.5 10 6 76 34 16 DT-25 8.5 11 7 70 34 18 DT-35 10.5 12 8.5 79 38 20 DT-50 10.5 14 9.8 87 43 23 DT-70 12.5 16 11.5 95 45 26 DT-95 12.5 18 13.5 105 50 28 DT-120 14.5 20 15 112 53 30 DT-150 14.5 22 16.5 118 56 34 DT-185 16.5 25 18.5 125 57 37 ...

    • H-E Type Terminal Block (VDE Standard) (12 Pole)

      H-E Type Terminal Block (VDE Standard) (12 Pole)

      Product parameter   Item No . Rated current(A) Section size (mm2)  Dimension (mm) L (mm) W (mm) H (mm) A (mm) B (mm) Ød (mm) H-E8 17.5 1.5 95.37 16.9 15.05 6.3 8.2 2.9 H-E10 24 2.5 117 20.5 16.8 9.6 10.1 3.2 H-E12 41 6 140.1 23.9 18.8 10 12.2 4.2 H-E14 57 10 158 25.7 25.15 10.75 13.6 5 ——The terminal is a copper nose. But there are openin...

    • Furcate Pre-insulating Terminal

      Furcate Pre-insulating Terminal

      Product parameter   Item No.  Dimension     color   U.S. standard screw bolt  diameter B L F H DΦ D2(mm) mm mm mm mm mm SV 1.25-3.2 # 4 3.2 5.7 21.2 6.5             10.0             4.3           red SV 1.25-3.7S # 6 3.7 5.7 21.2 6.5 SV 1.25-3.7L # 6 3.7 6.4 21.2 6.5 S...

    • H Type Terminal Block (12 Pole)

      H Type Terminal Block (12 Pole)

      Product parameter Item No . Rated current(A) Section size (mm2)  Dimension (mm) L (mm) W (mm) H (mm) A (mm) B (mm) Ød (mm) H-3 3 2.5/4 92 15.5 12.7 5.5 8.0 3.0 H-6 6 6 119 17.3 13.9 6.5 8.2 3.3 H-10 10 10 131 20.85 16.4 7.25 11.2 3.71 H-15 15 12 135 22.65 18.25 8.25 11.5 4.2 H-20 20 14 141.6 22.65 18.4 8.5 12.2 4.5 H-30 30 16 165 ...

    • Circular Pre-insulating Terminal

      Circular Pre-insulating Terminal

      Product parameter   Item No.  Dimension     color   U.S. standard screw bolt  diameter B L F H DΦ D2(mm) mm mm mm mm mm RV 1.25-3.2 # 4 3.2 5.7 17.8 4.95           10.0           4.3           red RV 1.25-3.7S # 6 3.7 5.7 17.8 4.95 RV 1.25-3.7M # 6 3.7 6.6 20.1 6.3 RV 1.25-3.7L # 6 3.7 8.0 21.5 7.0 RV 1.25-4S # 8 4.3 6.6 20.1 6.3 RV 1.25...